ESD is the abbreviation of English, which refers to electrostatic discharge. Of course, if it is accurate to say, the hazard of transferring static electricity caused by electrostatic contact with each other is very obvious. However, products used for electrostatic protection are also called ESD.

ESD prevention methods are also very obvious. Usually, the humidity of the environment is within a certain control. In addition, the floor should also be set as an anti-static floor or carpet. It is said that anti-static facilities can be installed, which can effectively prevent static electricity, especially electronic equipment like this, which is usually grounded with an anti-static hand strap to prevent static electricity, but this is an effective way to prevent it, but like a circuit board How to discharge the static electricity on the satellite basically has corresponding electronic components, which has a very good effect. After all, such a discharge satellite is still very unique, so when it is time to face the appearance of static electricity, this product is still More, especially the development of a protective work against static electricity, can be done through the circuit. Anti-static protection is usually carried out by means of a diode. If there is static electricity, the diode will form a pass through, so as to protect other circuits more effectively, then the diode is not necessarily burned when it breaks down, and it can be replaced. Back to normal.
ESDIn normal protection, it is usually to protect the CPU or integrated circuit. In the process of this protection, a normal way will not affect the normal circuit. If there are additional The appearance of static electricity will form a path to comprehensively protect other circuits, so this protection is still very important. After all, the prevention of static electricity is also to better protect the inheritance circuit and other electronic components. For this electrostatic effect, you can see, Whether it is the most basic protection or the protection of electronic components, in short. The use of aluminum tubes can play a very good role in the circuit, so anti-static diodes like this are usually connected in series by resistors, which can form a better effect.